On a hot summer afternoon the water in remonttool.ru a small country pool is heated naturally. After the weather is heat time is extended or, in general, the temperature does not reach a comfortable temperature of +22oC. In massive pools organic heating takes much longer. To address this problem, made a heater to the pool, working from different energy resources.

The simplest water heater to your pool is an heat exchanger. The foundation of the design is a tank, through which the hot liquid flows. It is joined to the heating system or any heating water heater. In the tank is an integrated coil. This part is the heat exchanger. Pool water slides through the coil, heating against the hot liquid inside the tank.

Why do you want such a complicated pool heater if you’re able to just run the water directly throughout the heater? You can use this type of scheme, but there are two problems:

When heated, they settle to the walls of this heat exchanger because of solid sludge, clogging it.

  • Pool water is filled with oxygen, which divides the metal walls of the heat exchanger.
  • To expensive boiler or leak heater does not fail, the heating system is equipped with another loop. The heat exchanger is simpler and more economical to change whether it gets clogged or flows from oxidation of the walls.

    Self-made heat exchanger – a coil of pipes connected to the heating system. In a tiny children’s pool piping is set to the principle of the machine“underfloor heating system“. A small amount of water the coil will heat quickly, and using a large volume won’t cope. Electric models

    The 2nd most popular is the electrical heater for the pool, composed of a body, heating components and a thermostat. Devices come in 2 types:

    The system consists of a large tank, where the water is heated by the heating elements, and from there it’s fed to the pool. The device is connected to the water treatment method of this pool. There is a filter in the front of the water heater, which extends purified water, which gets rid of the formation of solid deposits.

  • Depending on the capability, the devices are connected to single-phase and three-phase networks.
  • The need to warm a large amount of water demands the use of powerful devices. Electricity prices are huge, and you will need to lay another field of wiring. Heat pump

    Rather complicated from the device of the heater to the pool heat pump describes innovative technology. The device is efficient and cost-effective, however it is rarely used due to its high price.

    Significant: The heat pump works on the principle of the refrigerator, just here the circuit that releases heat, not cold, is in demand.

    The system consists of two circuits, in which the liquid circulates. The outer pipe can be placed underground, at the base of the window or alternative area where you are able to extract the heat. The inner circuit is placed inside the pool. It provides the water that the heat extracted by the outer pipe.